Honeywell 8680i User Manual

CHAPTER
10
8680i User Guide 203
ADVANCED APPLICATION
PROGRAMMING
The following commands are used when coding user interface commands for the
8680i directly into an application.
Note: The 8680i Software Development Kit can also be used to program the 8680i UI. See
the 8680i Software Development Kit User Guide at www.honeywellaidc.com.
Beeper and LED Sequences
BEPEHA
This command causes one of the following beeper and LED sequences to be exe-
cuted, based on a required character parameter, for example, BEPEHA1. See Good
Read and Error Indicators on page 42 for further information.
1 Execute an LED sequence of 130 milliseconds of good read LED illumination
followed by 70 milliseconds of no illumination.
2 Execute an LED sequence of 1500 milliseconds of good read LED illumination
followed by 500 milliseconds of no illumination.
3 Execute an LED sequence of 4500 milliseconds of good read LED illumination
followed by 500 milliseconds of no illumination.
4 Execute a beep sequence (no LED) of 160 milliseconds at 1600 Hz.
5 Execute a beep sequence (no LED) of 160 milliseconds at 3250 Hz.
6 Execute a beep sequence (no LED) of 160 milliseconds at 4200 Hz.
7 Execute a good read beep sequence.
8 Execute an error beep sequence. When using host acknowledgment, BEPEHA8
also indicates an erroneous host acknowledgment (see Host Acknowledgment
on page 38).
a Execute a menu good beep sequence.
b Execute a menu error beep sequence.

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g