Honeywell 8680i User Manual

14 8680i User Guide
Pair with Bluetooth Low Energy (BLE) Devices
Use the following codes to connect to Bluetooth low energy devices. Scan HID BLE
Connect to connect the 8680i to Bluetooth Low Energy HID devices. Scan Serial
BLE Connect to establish two-way communication between the 8680i and Blue-
tooth Low Energy serial devices.
Pair with an Android™ Mobile Device
Tap and Pair
You can pair your Android™ phone with the 8680i by touching the devices together.
1. Scan the NFC On bar code with the 8680i.
2. Make sure the NFC setting is On in your phone.
3. Touch the Android phone to the scanner.
4. The phone recognizes the scanner and prompts you to pair.
5. Verify the pairing of the 8680i in your phone’s Bluetooth settings.
Pair with an Android, Apple™ or Windows® Mobile Device
The 8680i can pair with Android, Apple, and Windows mobile devices, excluding
Windows CE and Mobile.
HID BLE Connect
Serial BLE Connect
NFC On
*NFC Off

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g