Honeywell 8680i User Manual

8680i User Guide 19
scanning the following bar code:
See Suffix Selections if you require other termination characters.
3. In the VoiceConsole, set the Vocollect device to:
• Pairing type Bluetooth Scanner
• Connection mode Device listens for peripheral connection
• Security type Disabled
4. Simple scan-based pairing can be accomplished by creating a dedicated
pairing bar code and applying it to each Vocollect device. The EZPairing bar
code begins with {FNC3} LnkB, followed by 12 digits, like the sample below.
5. The Bluetooth symbol changes from crossed out or flashing to continuously lit
in the user window status screen when the 8680i pairs with a host. (See WiFi
and Bluetooth Status.) Once the 8680i battery is charged and you have paired
it to a host device, you may begin scanning bar codes. Verify the 8680i
operation by scanning a bar code from the Sample Symbols, beginning on page
233.
Configure the 8680i with EZConfig for Scanning
Use the EZConfig for Scanning tool to configure your 8680i online:
1. Access the Honeywell Technical Support Downloads Portal at https://
hsmftp.honeywell.com.
2. Go to Software > Barcode Scanners > Software > Tools and Utilitites >
EZConfig for Scanning > Current.
CR/LF Suffix

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g