Honeywell 8680i User Manual

48 8680i User Guide
Object Detection Trigger
When in Object Detection Mode, you can use the trigger to scan bar codes as well,
but you may not want to allow trigger use when in this mode. Program either No
Trigger or Trigger Allowed by scanning one of the codes below. Default = Trigger
Allowed.
Poor Quality Codes
Poor Quality 1D Codes
This setting improves the 8680i’s ability to read damaged or badly printed linear
bar codes. When Poor Quality 1D Reading On is scanned, poor quality linear bar
code reading is improved, but the 8680i’s snappiness is decreased, making it less
aggressive when reading good quality bar codes. This setting does not affect 2D
bar code reading. Default = Poor Quality 1D Reading Off.
Poor Quality PDF Codes
This setting improves the 8680i’s ability to read damaged or badly printed PDF
codes by combining information from multiple images. When Poor Quality PDF
On is scanned, poor quality PDF code reading is improved, but the 8680i’s snappi-
No Trigger
* Trigger Allowed
Poor Quality 1D Reading On
* Poor Quality 1D Reading Off

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g