Honeywell 8680i User Manual

8680i User Guide 43
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the 8680i emits
on a good read. Default = Medium.
Vibrate – Good Read
The 8680i vibrates once when a bar code is successfully read, and twice when a
programming bar code is successfully read. When a programming bar code is
unsuccessful, the 8680i emits one long vibration (2 times the Vibrate Duration
length). Scan Vibrate - Good Read Off to keep the 8680i from vibrating. Default =
Vibrate - Good Read On.
* High
Off
Low (1600 Hz)
* Medium
(2700 Hz)
High (4200 Hz)
Vibrate- Good Read Off
* Vibrate- Good Read On

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g