Honeywell 8680i User Manual

50 8680i User Guide
User-Specified Aimer Delay
If you want to set your own length for the duration of the delay, scan the bar code
below, then set the time-out (from 0 - 4,000 ms) by scanning digits, then the Save
bar code from the Programming Chart on page 235.
Aimer Mode
This feature allows you to turn the aimer on and off. When the Interlaced bar code
is scanned, the aimer is interlaced with the illumination LEDs. Default = Interlaced
Centering
Use Centering to narrow the 8680i’s field of view to make sure that it reads only
those bar codes you intend to read. For instance, if multiple codes are placed
closely together, centering insures that only the desired codes are read. (Centering
can be used in conjunction with Aimer Delay, page 49, for the most error-free oper-
ation in applications where multiple codes are spaced closely together. Using the
Aimer Delay and Centering features, the 8680i can emulate the operation of older
systems, such as linear laser bar code scanners.)
* Off (no delay)
Delay Duration
Off
* Interlaced

Honeywell 8680i Specifications

General

Type	Wearable bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Motion tolerance (cm/s)	584
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 39, PDF417, U.P.C.
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417
Bluetooth version	4.1
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
Built-in display	No
International Protection (IP) code	IP54
Charging time	4 h
Battery voltage	3.6 V
Power source type	Battery
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	81 mm
Width	56 mm
Weight	- g