Honeywell Touchpoint Plus Technical Handbook

Commissioning
MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 65 Technical Handbook
6.14.3 Editing a Configured Channel
To edit an already configured channel:
1) Login as an Administrator or Service.
2) Touch Menu>Configuration>Channel settings and then select an I/O module.
3) Touch the required channel.
4) Touch the screen that you want to edit (refer to previous sections of this manual).
5) Enter the required values in the New Value field and touch [Finish].
6) Review all parameters are valid and touch [Apply].
7) The system will return the new value; touch [Update] to confirm.
6.14.4 Editing mA Input Channel Settings
1) Log in as Service.
2) Touch Menu>Configuration>Channel Settings.
3) Touch the Input Module you want
4)
5) Touch the [Channel] you want to change and then touch [Select].

Honeywell Touchpoint Plus Specifications

General

Brand	Honeywell
Model	Touchpoint Plus
Category	Controller
Language	English