Honeywell Touchpoint Plus Technical Handbook

Touchpoint Plus User Guide
MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 98 Technical Handbook
7.12 Viewing Output Channels
From the Input screen, toggle the Home icon between Channel Tile>Channel Summary>Channel
Output.
1) From the Input screen, select Channel List or Channel Tile.
2) A list of all output channels is shown in order of channel ID. The channel ID, location tag and status are shown.
3) The list can be filtered by status Fault, Inhibit, Warning or All.
4) Touch a channel and the Channel detail screen will appear. Depending on access level, a number of options will
be shown:
Function
Icon
Access Level
Comment
Channel configuration
Service
Change the output channel configurations: Inhibit, Fault,
Warning, and Over-range output level
Linked input Channel
Nr.
Viewer
Display an output channel number that is mapped to the
terminal number

Honeywell Touchpoint Plus Specifications

General

Brand	Honeywell
Model	Touchpoint Plus
Category	Controller
Language	English