Honeywell Touchpoint Plus Technical Handbook

Commissioning
MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 71 Technical Handbook
6.14.6 Editing Relay Output Channel Settings
Prior to starting you should have completed configuring or editing all of the required input channels.
1) Login as an Administrator or Service.
2) Touch Menu>Configuration>Channel settings.
3) Touch the required Relay Output Module (circled):
4) To get this window:
5) Touch a channel to commission or edit and touch [Select].
6) Touch the buttons and boxes to make changes as required:

Honeywell Touchpoint Plus Specifications

General

Brand	Honeywell
Model	Touchpoint Plus
Category	Controller
Language	English