HP 5920 Configuration Guide

127
Ste
p
Command Remarks
10. (Optional.) Enter raw request
view.
raw-request
Every time you enter the raw request view,
the previously configured content of the
HTTP request is removed.
11. (Optional.) Specify the
content of a GET request for
the HTTP operation.
Enter or paste the content.
By default, no contents are specified.
This step is required for the raw operation.
12. Save the input and exit to
HTTP operation view.
quit N/A
Configuring the UDP jitter operation
CAUTION:
To ensure successful UDP jitter operations and avoid affecting existing services, do not perform the
operations on well-known ports from 1 to 1023.
Jitter means inter-packet delay variance. A UDP jitter operation measures unidirectional and
bidirectional jitters so that you can verify whether the network can carry jitter-sensitive services such as
real-time voice and video services.
The UDP jitter operation works as follows:
1. The NQA client sends UDP packets to the destination port at a regular interval.
2. The destination device takes a time stamp to each packet that it receives, and then sends the
packet back to the NQA client.
3. Upon receiving the responses, the NQA client calculates the jitter according to the time stamps.
The UDP jitter operation requires both the NQA server and the NQA client. Before you perform the UDP
jitter operation, configure the UDP listening service on the NQA server. For more information about UDP
listening service configuration, see "Configuring the NQA server."
T
o
configure a UDP jitter operation:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.
3. Specify the UDP jitter type
and enter its view.
type udp-jitter N/A
4. Specify the destination
address of UDP packets.
destination ip ip-address
By default, no destination IP
address is specified.
The destination IP address must be
the same as that of the listening
service on the NQA server.

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English