HP 5920 Configuration Guide

129
Ste
p
Command Remarks
3. Specify the SNMP type and
enter its view.
type snmp N/A
4. Specify the destination
address of SNMP packets.
destination ip ip-address
By default, no destination IP address is
specified.
5. (Optional.) Specify the source
port of SNMP packets.
source port port-number
By default, no source port number is
specified.
6. (Optional.) Specify the source
IP address of SNMP packets.
source ip ip-address
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
SNMP packets can be sent out.
Configuring the TCP operation
The TCP operation measures the time for the NQA client to establish a TCP connection to a specific port
on the NQA server.
The TCP operation requires both the NQA server and the NQA client. Before you perform a TCP
operation, configure a TCP listening service on the NQA server. For more information about the TCP
listening service configuration, see "Configuring the NQA server."
T
o
configure the TCP operation:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.
3. Specify the TCP type and
enter its view.
type tcp N/A
4. Specify the destination
address of TCP packets.
destination ip ip-address
By default, no destination IP address is
specified.
The destination address must be the
same as the IP address of the listening
service configured on the NQA server.
5. Specify the destination port of
TCP packets.
destination port port-number
By default, no destination port number
is configured.
The destination port number must be
the same as that of the listening service
on the NQA server.
6. (Optional.) Specify the source
IP address of TCP packets.
source ip ip-address
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
TCP packets can be sent out.

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English