To Next Page

To Previous Page

218

Tcl-defined policy configuration example

Network requirements

Use Tcl to create a monitor policy on the device. This policy must meet the following requirements:

• EAA sends the log message "rtm_tcl_test is running" when a command that contains the display

this string is entered.

• The system executes the command only after it executes the policy successfully.

Configuration procedure

# Edit a Tcl script file (rtm_tcl_test.tcl, in this example) for EAA to send the message "rtm_tcl_test is

running" when a command that contains the display this string is executed.

::comware::rtm::event_register cli sync mode execute pattern display this user-role

network-admin

::comware::rtm::action syslog priority 1 facility local4 msg rtm_tcl_test is running

# Download the Tcl script file from the TFTP server at 1.2.1.1.

<Sysname> tftp 1.2.1.1 get rtm_tcl_test.tcl

# Enter system view.

<Sysname> system-view

# Create the Tcl-defined policy test and bind it to the Tcl script file.

[Sysname] rtm tcl-policy test rtm_tcl_test.tcl

[Sysname] quit

Verifying the configuration

# Display information about the policy.

<Sysname> display rtm policy registered

Total number: 1

Type Event TimeRegistered PolicyName

TCL TCL Apr 21 16:33:00 2012 test

# Enable the information center to output log messages to the current monitoring terminal.

<Sysname> terminal monitor

# Execute the display this command. Verify that the system displays "rtm_tcl_test is running" and a

message about the policy being successfully executed.

<Sysname> display this

return

<Sysname>%Jun 4 15:02:30:354 2013 Sysname RTM/1/RTM_ACTION: rtm_tcl_test is running

%Jun 4 15:02:30:382 2013 Sysname RTM/6/RTM_POLICY: TCL policy test is running

successfully.

HP 5920 Configuration Guide

Other manuals for HP 5920