HP 5920 Configuration Guide

79
Table 8 Default output rule for diagnostic logs
Destination Lo
g
source modules Out
p
ut switch Severit
y
Diagnostic log file All supported modules Enabled Debug
Default output rules for security logs
Security logs can only be output to the security log file, and cannot be filtered by source modules and
severity levels. Table 9 shows the default output rule for security logs.
Table 9 Defaul
t output rule for security logs
Destination Lo
g
source modules Out
p
ut switch Severit
y
Security log file All supported modules Disabled Debugging
Default output rules for hidden logs
Hidden logs can be output to the log host, the log buffer, and the log file. Table 10 shows the default
output rules for hidden logs.
Table 10 Default output rules for hidden logs
Destination Lo
g
source modules Out
p
ut switch Severit
y
Log host All supported modules Enabled Informational
Log buffer All supported modules Enabled Informational
Log file All supported modules Enabled Informational
Default output rules for trace logs
Trace logs can only be output to the trace log file, and cannot be filtered by source modules and severity
levels. Table 11 shows the default output rules for trace logs.
Table 11 Defaul
t output rules for trace logs
Destination Lo
g
source modules Out
p
ut switch Severit
y
Trace log file All supported modules Enabled Debugging
Log formats
The format of logs varies with output destinations. Table 12 shows the original format of log information,
which might be different from what you see. The actual format depends on the log resolution tool used.

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English