To Next Page

To Previous Page

198

[DeviceA-acl-adv-3000] quit

# Create traffic class tech_c, and configure the match criterion as ACL 3000.

[DeviceA] traffic classifier tech_c

[DeviceA-classifier-tech_c] if-match acl 3000

[DeviceA-classifier-tech_c] quit

# Create traffic behavior tech_b, configure the action of mirroring traffic to port Ten-GigabitEthernet

1/0/3.

[DeviceA] traffic behavior tech_b

[DeviceA-behavior-tech_b] mirror-to interface ten-gigabitethernet 1/0/3

[DeviceA-behavior-tech_b] quit

# Create QoS policy tech_p, and associate traffic class tech_c with traffic behavior tech_b in the QoS

policy.

[DeviceA] qos policy tech_p

[DeviceA-qospolicy-tech_p] classifier tech_c behavior tech_b

[DeviceA-qospolicy-tech_p] quit

# Apply QoS policy tech_p to the incoming packets of Ten-GigabitEthernet 1/0/4.

[DeviceA] interface ten-gigabitethernet 1/0/4

[DeviceA-Ten-GigabitEthernet1/0/4] qos apply policy tech_p inbound

[DeviceA-Ten-GigabitEthernet1/0/4] quit

Verifying the configuration

# Verify that the server can monitor the following traffic:

• All traffic sent by the Technical department to access the Internet.

• IP traffic that the Technical department sends to the Marketing department during working hours on

weekdays.

(Details not shown.)

HP 5920 Configuration Guide

Other manuals for HP 5920