To Next Page

To Previous Page

257

</capabilities>

</hello>

# Change the log buffer size for the Syslog module to 512.

<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

xmlns:web="urn:ietf:params:xml:ns:netconf:base:1.0">

<edit-config>

</target>

</LogBuffer>

</Syslog>

</top>

</config>

</edit-config>

</rpc>

Verifying the configuration

If the client receives the following text, the edit-config operation is successful:

<?xml version="1.0" encoding="UTF-8"?>

<rpc-reply message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

Saving, rolling back, and loading the configuration

Use NETCONF to save, roll back, or load the configuration.

Saving the configuration

# Copy the following text to the client to save the device configuration to the specified file:

<?xml version="1.0" encoding="UTF-8"?>

<save>

<file>Specify the configuration file name</file>

</save>

</rpc>

The name of the specified configuration file must start with the storage media name and end with the

extension .cfg. The total length of the save path and file name must be no more than 191 characters. If

the text includes the file column, you must specify the file name and the specified file will be used as the

next-startup configuration file. If the text does not include the file column, the configuration is

automatically saved to the default main next-startup configuration file.

HP 5920 Configuration Guide

Other manuals for HP 5920