To Next Page

To Previous Page

265

<?xml version="1.0" encoding="UTF-8"?>

<rpc-reply message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<CLI>

<![CDATA[Responses to the commands]]>

</Execution>

</CLI>

</rpc-reply>

CLI operation example

Configuration requirements

Send the display current-configuration command to the device.

Configuration procedure

# Enter XML view.

<Sysname> xml

# Exchange capabilities.

urn:ietf:params:netconf:base:1.0

</capability>

</capabilities>

</hello>

# Copy the following text to the client to execute the display current-configuration command:

<?xml version="1.0" encoding="UTF-8"?>

<CLI>

display current-configuration

</Execution>

</CLI>

</rpc>

Verifying the configuration

If the client receives the following text, the operation is successful:

<?xml version="1.0" encoding="UTF-8"?>

<rpc-reply message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<CLI>

<Execution><![CDATA[

<Sysname>display current-configuration

version 7.1.045, ESS 2305

sysname ASBR2

HP 5920 Configuration Guide

Other manuals for HP 5920