HP 5920 Configuration Guide

225
Attribute Attribute value Hexadecimal form
ACS connect
password
5678 35363738
For more information about DHCP and DHCP Option 43, see layer 3—IP Services Configuration Guide.
Configuring the preferred ACS attributes from the CLI
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter CWMP view.
cwmp N/A
3. Configure the preferred ACS
URL.
cwmp acs url url
By default, no preferred ACS URL
has been configured.
4. Configure the username for
authentication to the preferred
ACS URL.
cwmp acs username username
By default, no username has been
configured for authentication to the
preferred ACS URL.
5. (Optional.) Configure the
password for authentication to
the preferred ACS URL.
cwmp acs password { cipher |
simple } password
By default, no password has been
configured for authentication to the
preferred ACS URL.
Configuring the default ACS attributes from the CLI
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter CWMP view.
cwmp N/A
3. Configure the default ACS
URL.
cwmp acs default url url
By default, no default ACS URL has
been configured.
4. Configure the username for
authentication to the default
ACS URL.
cwmp acs default username
username
By default, no username has been
configured for authentication to the
default ACS URL.
5. (Optional.) Configure the
password for authentication
to the default ACS URL.
cwmp acs default password
{ cipher | simple } password
By default, no password has been
configured for authentication to the
default ACS URL.
Configuring CPE attributes
You can assign CPE attribute values to the CPE from the CPE's CLI or the ACS. The CLI- and
ACS-assigned values overwrite each other, whichever is assigned later.
For more information about the configuration methods supported for each CPE attribute, see
"Configuration task list."

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English