HP Carrier-Grade rx2800 i2 Server DC User Manual

Boottest:
BOOTTEST Settings Default Variable
OS is not speedy boot aware.
Selftest Setting
--------- --------------
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
LAN Address Information:
LAN Address Path
----------------- ----------------------------------------
M 001 Mac(00237D447E94) PcieRoot(0x30304352)/Pci(0x1C,0x0)/Pci (0x0,0x0)/MAC(0023
7D447E94,0x0)
002 Mac0(0237D447E95) PcieRoot(0x30304352)/Pci(0x1C,0x0)/Pci (0x0,0x0)/MAC(0023
7D447E95,0x0)
003 Mac0(0237D448E5E) PcieRoot(0x30304352)/Pci(0x1C,0x2)/Pci (0x0,0x0)/MAC(0023
7D448E5E,0x0)
004 Mac0(0237D448E5F) PcieRoot(0x30304352)/Pci(0x1C,0x2)/Pci (0x0,0x1)/MAC(0023
7D448E5F,0x0)
FIRMWARE INFORMATION
System Firmware A Revision: 01.03
PAL_A: 4.29 SAL Spec: 3.20
PAL_B: 4.29 SAL_A: 2.00
UEFI Spec: 2.10 SAL_B: 3.01
UEFI Shell: 1.00 SMBIOS: 2.4
SYSTEM SECURITY CONFIGURATION
TPM: Present
Shell>
Completing installation
After all components are installed:
1. Close the processor cage.
2. Install the PCI riser cage.
3. Install the access panel.
4. Install the server into the rack.
5. Connect all cables.
6. Power on the server.
58 Optional components

HP Carrier-Grade rx2800 i2 Server DC Specifications

General

Brand	HP
Model	Carrier-Grade rx2800 i2 Server DC
Category	Server
Language	English