To Next Page

To Previous Page

NOTE Values represent individual shock events and

are not indicative of repetitive shock events.

Vibration (operating) Operating random: 0.5 G (rms), 5–300 Hz

Vibration (non-operating) Random: 2.0 G (rms), 10–500 Hz

NOTE Values are not indicative of continuous

vibration.

PCI card slot power specification

Table 1-10 PCI and PCI Express slot power specifications

Slot# Slot Type Slot Power (Maximum)

1 PCI (32–bit, 33 MHz) 10 W*

2 PCI Express x16 graphics 150 W**

3 PCI Express x8 (x4) 25 W*

4 PCI Express x16 (x4) 25 W*

5 PCI-X 133 25 W*

6 PCI-X 100 25 W*

7 PCI-X 100 25 W*

* In addition to these slot power specifications, the overall power

consumption of the system (including I/O cards, processor, and

memory) must not exceed the maximum ratings of the system power

supply. See

Power supply specifications on page 7 for details.

** Includes 75 W maximum from the system board connector, and

75 W maximum from the auxiliary graphics power connector.

NOTE If a graphics card requiring more than 75 W is installed, HP recommends not using slot

3, which is the PCI Express slot below the graphics slot. In addition to these slot power

specifications, the overall power consumption of the system (including I/O cards, processors,

memory, and drives) must not exceed the maximum ratings of the system power supply.

For hardware specifications of other system components, such as graphics cards or optical drives, see

the website of the specific manufacturer.

Table 1-9 Environmental Specifications (continued)

10 Chapter 1 Product overview ENWW

HP XW8400 User Manual

Other manuals for HP XW8400