Inficon Micro GC Fusion 2-Module User Manual

6 | Installation INFICON
106 / 319 074-594-P1H Micro GC Fusion Operating Man-
ual
6.13.1.6 Installing the 10-Port SF Valco Stream Selector Accessory
1
Identify sample line
1 IN
and remove the black filter caps from the desired
sample line ports.
2
Place a union fitting and ferrule onto a 1/16 in. OD stainless steel sample line.
3
Connect the 1/16 in. sample line to the
1 IN
filter on the Valco stream selector.
4
While holding the filter with a 7/16 in. wrench, use a 1/4 in. wrench to turn the
union fitting. Over-tighten by 1/2 turn to swage the union fitting and ferrule onto
the 1/16 in. sample line.
5
Loosen the union fitting and then tighten it again.

Inficon Micro GC Fusion 2-Module Specifications

General

Brand	Inficon
Model	Micro GC Fusion 2-Module
Category	Measuring Instruments
Language	English