Inficon Micro GC Fusion 2-Module User Manual

INFICON Introduction | 4
074-594-P1H Micro GC Fusion Operating Manual 17 / 319
4.2 About Micro GC Fusion
Micro GC Fusion is an analytical instrument that can accommodate multiple gas
chromatograph (GC) modules, each performing GC analysis with individually
optimized chromatographic conditions. The sample is introduced through the front
sample inlet to optimize detection and separation on the GC modules using
appropriate carrier gases.
A GC module is a self-contained miniature gas chromatograph that consists of:
• a sample injector using Microelectromechanical Systems (MEMS) technology
• a resistively-heated, temperature programmable capillary column
• an electronic pressure control system
• a MEMS-based micro thermal conductivity detector (µTCD)
Chromatography software included with Micro GC Fusion may be operated from the
instrument front panel display, or by a networked computer. Both the analytical
method and the resulting data files are stored on the Micro GC Fusion hard drive.
4.3 Definition of Notes, Cautions and Warnings
When using this manual, please pay attention to the notes, cautions and warnings
found throughout. For the purposes of this manual they are definied as follows:
Pertinent information that is useful in achieving maximum Micro GC Fusion
efficiency when followed.
DANGER
Immediate danger
Death or very serious injuries can occur.
WARNING
Failure to heed these messages could result in personal injury.
WARNING
Dangerous voltages are present, which could result in personal injury.

Inficon Micro GC Fusion 2-Module Specifications

General

Brand	Inficon
Model	Micro GC Fusion 2-Module
Category	Measuring Instruments
Language	English