Inficon Micro GC Fusion 2-Module User Manual

6 | Installation INFICON
86 / 319 074-594-P1H Micro GC Fusion Operating Man-
ual
6.7.2 Set Up the Static IP Address
CAUTION
If Micro GC Fusion will be connected to a local area network, check with the
network administrator prior to changing to static IP address to avoid conflicts.
The wireless Ethernet port on Micro GC Fusion uses IP address 10.10.0.1. Do
not use this static IP address.
Three blocks of IP address spaces are reserved by the Internet Assigned Numbers
Authority (IANA) for private internets. INFICON recommends using these IP
addresses for setting up a static IP address on Micro GC Fusion.
Start IP Address End IP Address Remarks
10.0.0.0 10.255.255.255 24-bit block, 10/8 prefix, one class A
172.16.0.0 172.31.255.255 20-bit block, 172.16/12 prefix, 16 contiguous class B
192.168.0.0 192.168.255.255 16-bit block, 192.168/16 prefix, 256 contiguous class C network numbers
1
Click the icon.
2
Click
System Administration
.

Inficon Micro GC Fusion 2-Module Specifications

General

Brand	Inficon
Model	Micro GC Fusion 2-Module
Category	Measuring Instruments
Language	English