Inficon Micro GC Fusion 2-Module User Manual

INFICON Installation | 6
074-594-P1H Micro GC Fusion Operating Manual 77 / 319
5
Remove the two M3 x 8 screws on the chassis bottom using a 2 mm hex driver.
Retain screws for future use.
6
Mount the gas-liquid separator for the 2-module chassis as shown. Hold the gas-
liquid separator so that the slots on the gas-liquid separator align with the holes
on Micro GC Fusion.
7
Use a 2 mm hex driver to secure the gas-liquid separator to the Micro GC Fusion
chassis bottom with the two washers (084-031) and the two 8 mm M3 screws
(B3079191X).
8
Turn Micro GC Fusion back to the upright position.

Inficon Micro GC Fusion 2-Module Specifications

General

Brand	Inficon
Model	Micro GC Fusion 2-Module
Category	Measuring Instruments
Language	English