Interacoustics Eclipse Additional Information

Eclipse Additional Information Page 115
5.6 Protocol settings cVEMP
There is one default cVEMP protocols. The settings for the stimulus and recordings are:
Stimulus parameters
Type: 500Hz ToneBurst blackman (2:2:2)
Rate: 5.1/s
Intensity: AC: Typically ≥95 dBnHL is used, but is not preselected, and must be set by the user prior to star-
ing the test.
Recording parameters
Low pass filter: 1000Hz
High pass filter: 10Hz 6/oct

Interacoustics Eclipse Specifications

General

Brand	Interacoustics
Model	Eclipse
Category	Medical Equipment
Language	English