Komatsu D375A-8 User Manual

REPLY TO MESSAGE
1.
Input the selected item number in the Numeric Input box (1) on the screen of mail confirmation menu (g).
The
selected item number is written in place (2) of the
message text.
• Input the number by using the machine monitor
switch. Each switch corresponds to the value shown
on the right side below the switch.
• If you input an incorrect number, press switch F5, and
you can clear an input character at a time.
• If switch F5 is pressed when the input column is blank,
the screen returns to the standard screen.
2.
After inputting a selected item number, press switch F6.
3.
When the message “Do you send Numeric Input?” is dis-
played in the column (1) of the mail confirmation menu
screen, press switch F6 again. The input value will be sent
out.
When the message “Do you send Numeric Input?” is dis-
played, if you press switch F5, the screen returns to the
screen for replying to message. At this time, the previous
input value will be cleared.
SWITCHES
(1) Cigarette lighter (24V)
(2) Fuel control dial
(3) Rear lamp switch
(4) Headlamp switch
(5) Engine shutdown secondary switch
(6) Starting switch
(7) Pin puller control switch (if equipped)
(8) Horn switch
(9) Room lamp switch
(10) Wiper switch
(1
1) Engine room light switch (if equipped)
(12) Additional working lamp switch (if equipped)
(13) Access light switch (if equipped)
(14) Revolving lamp switch (if equipped)
(15) Console lifter switch
(16) Engine emergency shut down switch (if equipped)
EXPLANATION OF COMPONENTS OPERATION
3-90

Komatsu D375A-8 Specifications

General

Brand	Komatsu
Model	D375A-8
Category	Construction Equipment
Language	English