Komatsu D375A-8 - Method for Checking Undercarriage Oil

METHOD FOR CHECKING UNDERCARRIAGE OIL
kk
WARNING
Immediately after the machine is stopped, you may be scalded by hot oil spurting out or by touching
high-temperature parts. Accordingly
, wait until they have cooled down before starting the work.
Park the machine on a level ground and check for any reduc-
tion
in the oil of the idler (part P), track roller (part Q), and carri-
er roller (part R).
1.
Loosen the seal bolt (1) slowly.
REMARK
One each of seal bolt (1) is installed inside and outside of
the carrier roller.
2.
Remove the seal bolt (1).
If
no oil oozes, the oil level is low. Ask your Komatsu dis-
tributor for repair.
MAINTENANCE MAINTENANCE PROCEDURE
4-35