NOTICE
Once
this switch is turned to OFF position (b), all the pow-
er supply circuits are cut out. As a result, the radio tuning
preset button information and time information of the
clock will possibly be lost.
“ON”
When the lever is in ON position (a), the electrical circuit be-
comes connected. Check that this switch is in ON position (a)
before starting the engine.
“OFF”
When the lever is in OFF position (b), the electrical circuit is cut
off. Check that this switch is in OFF position (b) when storing
the machine for a long period or when performing maintenance
on the electric system.
When it is in OFF position, turn it to ON position while pushing
it down.
CHECKS BEFORE STARTING
METHOD FOR CHECKING FUEL LEVEL, ADDING FUEL
WARNING
When adding fuel, never spill the fuel nor let it overflow. This may cause fire. If any fuel has spilled, wipe
it up completely
. Fuel is highly flammable and dangerous. Do not bring any open flame near fuel.
1.
Turn the engine starting switch to ON position and check
the fuel level with the fuel gauge (G) on the monitor panel.
After checking, turn the starting switch to OFF position.
2.
After the work is finished, fill up the fuel tank by supplying
the fuel through the fuel filler port (F).
Check the fuel level with the dipstick at the fuel filler port.
3.
After adding, tighten the cap securely.
Fuel tank capacity: 1200 ℓ
ATTACHMENTS AND OPTIONS MACHINE WITH MINING SPECIFICATION
6-29
To Next Page
Loading...
Need help?
General
