Measure wear (A) of the door lock striker.
If wear (A) is 0.5 mm or more, replace the door lock striker.
If you use it as it is, its play increases and can cause breakage
of the hinge and lock door
.
METHOD FOR CHECKING WINDOW WASHER FLUID LEVEL, ADDING FLUID
Perform this check when the window washer fluid does not come out.
1.
Open the inspection cover in front of fuel tank on the left
side of the machine.
2.
Check the fluid level in the window washer tank (1).
3.
If the level is low, add the window washer fluid for automo-
bile.
Be careful not to let dirt or dust get in when adding the flu-
id.
METHOD FOR REPLACING WIPER BLADE
If the blade is damaged, the windshield is wiped unevenly. In
this case, replace the blade.
MAINTENANCE MAINTENANCE PROCEDURE
4-37
To Next Page
Loading...
Need help?
General
