6.
Remove
the drain plug (5) so that you do not get splashed
with the drained oil, and drain the oil.
7.
After draining the oil, tighten the drain plug (5).
8.
Pull out the dipstick (6) and add the engine oil through the
dipstick pipe hole.
9.
Check that the oil is between the H and L marks on the
dipstick
by referring to “METHOD FOR CHECKING OIL
LEVEL IN DAMPER CASE AND ADDING OIL”.
10.
Close the inspection cover.
CONSUMABLE PARTS
Replace consumable parts such as the filter element or air cleaner element at the time of periodic maintenance
or before they reach the wear limit. The consumable parts should be replaced correctly in order to ensure more
economic use of the machine. When replacing parts, Komatsu recommends using Komatsu genuine parts.
As a result of our continuous efforts to improve product quality, the part number may change. Inform your Ko-
matsu distributor of the machine serial number and check the latest part number when ordering parts.
ATTACHMENTS AND OPTIONS MACHINE WITH MINING SPECIFICATION
6-49
To Next Page
Loading...
Need help?
General
