9-2
To Display Application Selection Screen
Follow the procedure below to display the Application Selection Screen and select the
desired copying features.
1. Touch APPLICATION on the Basic Screen.
The Application Selection Screen will be displayed on the touch panel.
• When a function key is touched, it becomes highlighted. If you touch a
function key, another screen or two will display to enable you to enter the
appropriate settings.
• If one function on the menu is incompatible with another, it will appear
dimmed.
•The APPLICATION key will be highlighted when the Basic Screen is
restored after application selections have been made.
To restore the original copying conditions, touch CANCEL.
To clear all Application settings, touch ALL CLEAR.
2. Touch OK on the Application Selection Screen.
Selections will be completed and the Basic Screen will be restored.
With the Basic Screen displayed, you can press [START] to perform the
operation.
To Next Page
Loading...
Need help?
General
