Paper Information (continued)
10-3
Tray / Exit Tray Capacity
Tray Capacity for FS-113 Finisher in Staple mode
Paper Trays Capacity
Tray 1 and 2 (Main body tray) 500 sheets (20 lb)
Tray 3 and 4 (DB-211) 500 sheets (20 lb)
Tray 3 (DB-411) 1,500 sheets (20 lb)
LCT (LT-203) 2,000 sheets (20 lb)
Multi-sheet bypass tray
50 sheets (20 lb)
1 sheet each for special stock
Equipment Capacity
ADU Unlimited
Finisher (FS-113)
Secondary (Sub) tray:
250 sheets max. (or 36 mm max.) (20 lb)
20 sheets max. for thick paper and transparent film
Primary (Main) tray:
1,500 sheets max. (or 187.5 mm max.):
11”x17”, 8.5”x14”
3,000 sheets max. (or 375 mm max.):
8.5”x11”, 8.5”x11”R, 5.5”x8.5”, 5.5”x8.5”R
See the table below for paper capacity in Staple
mode.
Finisher (FS-114) See the tables on p. 10-4 to p. 10-5.
Inner tray (IT-101)
50 sheets max. for Exit tray 1
100 sheets max. for Exit tray 2
Exit tray (ET-101) 100 sheets max.
No. of copies Tray capacity (set) Tray capacity (sheet)
2 sheets
3 - 5 sheets
6 - 10 sheets
11 - 20 sheets
21 - 30 sheets
31 - 40 sheets
41 - 50 sheets
100 sets
80 sets
60 sets
40 sets
60 sets
60 sets
60 sets
200 sheets
400 sheets
600 sheets
800 sheets
1,800 sheets
2,400 sheets
3,000 sheets
10
Paper &
Original Info
Original
Information
Paper
Information
To Next Page
Loading...
Need help?
General
