Positioning Originals (continued)
3-5
Positioning Original on Platen Glass
Use the platen glass when originals are not suitable for use with the document feeder, e.g.,
when size is incompatible, when originals are folded, stapled, torn, or in otherwise poor
condition.
1. Raise the document feeder (or platen cover).
Place original FACE DOWN in the left rear corner, aligning the edge with the left
measuring guide.
2. Gently close the document feeder (or platen cover) to prevent the
original from shifting on the glass.
When selecting Book Copy, Non-Image Area Erase, AUTO mode in Repeat, or
AUTO Layout, DO NOT CLOSE the document feeder or platen cover. For
details on each function, see Section 9.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray
To Next Page
Loading...
Need help?
General
