[18] HDD Setting Menu (continued)
13-53
2 Touch 1. HDD Format, 2. HDD capacity confirm/delete, or 3. Unnecessary Document
Box delete, as required.
To format the HDD:
(1) Touch 1. HDD Format to display the HDD Format Screen.
(2) Touch YES. All the data stored in the HDD will be cleared.
Turn OFF then ON the main power switch to complete the formatting procedure.
Or, touch NO to cancel.
Touch RETURN on the HDD Format Screen to restore the HDD Setting Menu Screen.
To check the current state of the HDD capacity or delete the HDD data:
(1) Touch 2. HDD capacity confirm/delete to display the HDD Capacity Confirm/Delete
Screen.
The used area and whole area of the HDD capacity will be indicated in MB, and the
available area in percentage.
(2) To delete the data stored in the HDD, touch DELETE under the desired data item. The
popup menu will appear to confirm that the selected data should be deleted.
(3) Touch YES to delete the data, or NO to cancel. After touching YES, be sure to turn OFF
the main power switch, then turn it ON again.
Touch RETURN to restore the HDD Setting Menu Screen.
To delete the unnecessary document box:
(1) Touch 3. Unnecessary Document Box delete to display the Unnecessary Document
Box Delete Screen.
(2) Touch YES to delete the unnecessary box, or NO to cancel. After touching YES, be
sure to turn OFF the main power switch, then turn it ON again.
Touch RETURN to restore the HDD Setting Menu Screen.
3 Touch RETURN on the HDD Setting Menu Screen to restore the System/Copier Setting
Menu Screen.
4 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.
Procedure (RAM Disk Format)
1 Touch 18. HDD Setting menu to display the HDD Setting Menu Screen.
System/Copier Setting Menu Screen HDD Setting Menu Screen
File Format Screen
File Format Screen
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine
Mail Address
To Next Page
Loading...
Need help?
General
