Kubota BX1870 Workshop Manual

FRONT AXLE
BX1870,BX2370,BX2670,LA203A,LA243A,RCK48(P),RCK54(P),RCK60B,RCK60D,RCK54D, WSM
3-S3
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-13.)
9Y1210855FBS0003US0
Item N·m kgf·m lbf·ft
Front wheel mounting screw 149 to 179 15.2 to 18.3 110 to 132
Tie-rod slotted nut 18 to 34 1.8 to 3.5 13 to 25
Power steering cylinder mounting screw 48 to 55 4.9 to 5.7 36 to 41
Power steering hose 24 to 27 2.4 to 2.8 18 to 20
Bevel gear case mounting screw (M10) 48 to 55 4.9 to 5.7 36 to 41
Bevel gear case mounting screw (M12) 78 to 90 7.9 to 9.2 58 to 66
Front gear case cover mounting screw 48 to 55 4.9 to 5.7 36 to 41
KiSC issued 02, 2017 A

Kubota BX1870 Specifications

General

Engine Type	Diesel
Engine Power	18 hp
Transmission	Hydrostatic
Fuel Capacity	6.6 gallons
Wheelbase	55.1 inches
Type	Sub-Compact Utility Tractor
Engine	Kubota D722
PTO Power	13.5 hp
Number of Cylinders	3
Cooling	Liquid
Drive	4WD
Drive Type	4WD
Width	44.5 inches
Hydraulic System Type	Open center
PTO Speed	540 RPM
Displacement	0.719 L
Fuel Tank Capacity	6.6 gallons
Gears	Infinite (2-range) forward and reverse
Front Tire Size	18x8.5-10
Rear Tire Size	26x12-12