MOWER
BX1870,BX2370,BX2670,LA203A,LA243A,RCK48(P),RCK54(P),RCK60B,RCK60D,RCK54D, WSM
7-S4
4. SETTING UP MOWER
[1] RCK48-18BX, RCK54-23BX, RCK60B-23BX, RCK48P-18BX, and
RCK54P-23BX
Assembling Mower
1. Place the mower on blocks as illustrated.
Turn the anti-scalp rollers sideways and attach to the arms of
the deck at the upper position with clevis pins and snap rings.
Remove the blocks. (RCK60B-23BX, RCK54P-23BX and
RCK54-23BX)
2. Attach the front anti-scalp rollers to the deck with clevis pins and
snap rings. (RCK48P-18BX and RCK48-18BX)
To avoid serious injury or death:
• Do not operate the mower without the discharge deflector
properly in position.
3. Attach the discharge to the deck with the spring, discharge pin
and cotter pin.
4. Secure the spring to the discharge deflector as illustrated.
9Y1210855MOS0004US0
Setting Mower
• Park the tractor on a firm, flat and level surface, set the
parking brake, stop the engine and remove the key.
1. Start the engine and the hydraulic lever rearward to raise the
mower rear link to the highest position.
2. Stop the engine and remove the key.
3. Roll the mower under the tractor from right side.
9Y1210855MOS0005US0
(1) Anti-scalp Roller
(2) Block
(3) Clevis Pin
(4) Snap Ring
(5) Deck
(6) Discharge Pin
(7) Discharge Deflector
(8) Spring
(9) Cotter Pin
(1) Hydraulic Control Lever
To Next Page
Loading...
Need help?
General
