Kubota BX1870 Workshop Manual

GENERAL
BX1870,BX2370,BX2670,LA203A,LA243A,RCK48(P),RCK54(P),RCK60B,RCK60D,RCK54D, WSM
G-46
(2) Check Point of Initial 50 Hours
Changing Gear Box Oil
CAUTION
• Be sure to stop the engine and remove the key before
changing the oil.
1. Dismount the mower from the tractor, and place the mower on
level ground.
2. Remove the oil filler plug (2).
3. Remove the drain plug (1), and drain the used oil completely.
4. After draining the used oil, reinstall the drain plug.
5. Fill with new oil up to the specified level.
IMPORTANT
• Use the specified gear oil.
Refer to "[2] MOWER" on page G-12.
9Y1210855GEG0061US0
(3) Check Point of Every 150 Hours
Changing Gear Box Oil
1. See above.
9Y1210855GEG0062US0
(4) Check Point of Every 1 Year
Checking Gear Box Oil Seal
1. Check gear box oil seals (1),(2)
9Y1210855GEG0105US0
(1) Drain Plug
(2) Oil Filler Plug
[A] RCK60B-23BX, RCK54-23BX,
RCK48-18BX, RCK48P-18BX and
RCK54P-23BX
[B] RCK54D-26BX and
RCK60D-26BX
(1) Oil Seal (2) Oil Seal
KiSC issued 02, 2017 A

Kubota BX1870 Specifications

General

Engine Type	Diesel
Engine Power	18 hp
Transmission	Hydrostatic
Fuel Capacity	6.6 gallons
Wheelbase	55.1 inches
Type	Sub-Compact Utility Tractor
Engine	Kubota D722
PTO Power	13.5 hp
Number of Cylinders	3
Cooling	Liquid
Drive	4WD
Drive Type	4WD
Width	44.5 inches
Hydraulic System Type	Open center
PTO Speed	540 RPM
Displacement	0.719 L
Fuel Tank Capacity	6.6 gallons
Gears	Infinite (2-range) forward and reverse
Front Tire Size	18x8.5-10
Rear Tire Size	26x12-12