Kyocera DuraForce PRO User Manual

Phone Calls 36
2. Once you have established the connection, tap Add call, and dial the second number
(or place the call from Recents or Contacts). This puts the first caller on hold and dials
the second number.
3. When you’re connected to the second party, tap
Merge calls
. Your conference call is
now in session.
4. To end the 3-way call, tap .
Note:
If one of the parties you called hangs up during your call, you and the remaining party
stay connected. If you initiated the call and are the first to hang up, all parties are
disconnected.
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when
your phone is turned off. You can continue to make calls from your phone when you have
activated Call Forwarding.
Note:
You may be charged a higher rate for calls you have forwarded.
To activate Call Forwarding:
1. From the Home screen, tap
Phone
>
DIALPAD
.
2. Enter
*72
.
3. Enter the area code and phone number to which you want your calls forwarded.
4. Tap . You will see the message if the call forwarding is activated.
5. Confirm the message and tap
Forward Calls
to forward your call or tap
Cancel
to
cancel forwarding.
To deactivate Call Forwarding:
1. From the Home screen, tap
Phone
>
DIALPAD
.
2. Enter
*73
.
3. Tap .
Set Up Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory.
To assign a speed dial number to a contact:
1. From the Home screen, tap
Phone
>
DIALPAD
> >
Speed dial setup
.

Kyocera DuraForce PRO Specifications

General

Brand	Kyocera
Model	DuraForce PRO
Category	Cell Phone
Language	English