Kyocera KM-1500 User Manual

FONT
107
FONT — change current FONT
Format
FONT font-number;
Parameter
font-number:
number identifying the font
Function
The FONT command specifies a typeface for all text that follows.
The font-number should designate a resident bitmap font, a scalable font selected by the
SFNT command, or a nonresident font generated by the LDFC command or downloaded
from the computer. If an undefined font-number is specified, the font will not change. To
print a font list, use the FLST command.
For a bitmap font, depending on the font mode (FTMD) value, the FONT command also
sets the line and character spacing and page orientation to match the attributes of the
selected font. The scalable fonts, however, ignore the font mode setting. Line spacing
must be specified by the user in this case using one of the line spacing commands (SLS,
SLPI, etc.).
File
!R! RES; UNIT P;
SFNT ’Univers-BdIt’, 18, 2000;
SFNT ’Univers-BdIt’, 14, 2001;
FONT 2000;
EXIT;
—-—- Font Guideline —-—-
!R! FONT 2001; EXIT;
Be distinctive.
!R! FONT 13; FTMD 15; EXIT;
Use different font sizes and styles to set off titles,
headings, footnotes, etc.
!R! PAGE; EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g