Kyocera KM-1500 User Manual

PRESCRIBE Command Reference
342
SULP — Set UnderLine Parameters
Format
SULP distance, thickness;
Parameters
distance:
distance below the baseline
thickness:
thickness of the underline
Function
The SULP command sets the thickness of any subsequent underlining as well as the
distance below the baseline, in the unit value designated by the UNIT command. The
distance parameter is limited only by the size of the page. Negative values can be used to
obtain overlines.
The minimum underline thickness is one dot. The maximum underline thickness is 127
dots. The default values include:
• Distance below baseline: 7 dots
• Thickness of underline: 4 dots
• One dot equals approximately 0.0083 cm or 0.0033 inches.
The SULP command does not affect the underline character (_), which is an independent
character with ASCII code 95 (hex 5F). If your word-processing software writes
underlines by backing up and printing the underline character instead of using the
printing system’s automatic underline feature, the SULP command will control only
underlines printed by the U-option in PRESCRIBE commands such as TEXT.
File
!R! RES; UNIT C; SLS 0.8;
SFNT ’Helvetica-Nr’, 12;
TEXT ’Default paramaters’, E, U; TEXT ’, ’, E;
SULP .2, .1;
TEXT ’heavier underlining’, N, U;
TEXT ’and even’, E;
SULP -.32, .04;
TEXT ’OVERLINING’, E, U;
TEXT ’!’;
PAGE;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g