Kyocera KM-1500 User Manual

PIE
197
PIE — draw PIE chart
Format
PIE radius, starting-angle, slice-size, ...;
Parameters
radius:
radius of the pie chart
starting-angle:
position of the first slice
slice-size:
relative sizes of the slices
Function
The PIE command is a standard mode graphics command which draws a pie chart
centered at the current cursor position. The sizes of the slices may be specified using any
convenient non-negative integers. (PIE commands are ignored if they contain negative
slices, or slices with decimal fractions.) The sum of the slice sizes should not exceed
9999. The total length of the command must not exceed 255 characters.
The printer automatically converts the slice sizes to angles totaling 360 degrees. It draws
the first slice starting at the position specified by the second parameter (0 = vertically
up), then draws the other slices in order, proceeding in a clockwise movement. The line
thickness is designated by the SPD command.
File
!R! RES; UNIT C;
MZP 10, 10;
PIE 3, 0, 10, 20, 30, 40;
PAGE;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g