VMAL
353
VMAL — Virtual Mailbox ALias
Format
VMAL mailbox, alias[, password];
Parameters
mailbox:
number from 1 to 255 or character string representing number or alias of virtual mailbox
alias:
Character string representing the alias being set for the virtual mailbox given by mailbox
(up to 31 bytes)
password:
The password for the virtual mailbox given by mailbox if a password has been set for it.
Function
The VMAL command sets an alias for a virtual mailbox. When an alias is set for a
virtual mailbox using this command, that alias may be used to identify the mailbox just
like the virtual mailbox number.
If this command is used on a virtual mailbox for which an alias has already been set, the
old alias will be overwritten. If the alias specified has already been set for another virtual
mailbox, an error will be displayed on the operator panel and the specification will be
invalid.
If an alias is to be set for a virtual mailbox for which a password is set, that virtual
mailbox’s password is required. An error will be displayed on the operator panel if no
password or the incorrect password is specified. (See page 8-8 of the Technical
Reference manual.)
Note that if command syntax is incorrect, such as when an alias longer than 31 bytes is
specified, the command will be invalid and no error will be displayed on the operator
panel.
The master password is valid for all virtual mailboxes.
File
To set the alias MyMailbox for virtual mailbox number 3 for which the password 9999
has been set:
!R! VMAL 3, "MyMailbox", 9999; EXIT;
To Next Page
Loading...
Need help?
General
Weight and Dimensions
