Kyocera KM-1500 User Manual

ALTF
23
ALTF — change to ALTernate Font
Format
ALTF alternate-number;
Parameter
alternate-number: a number from 0 to 47
Function
The ALTF command changes the current font to a font designated by an alternate
number. The actual font assigned to this alternate number is set by a previous SETF
command.
The alternate number can be a bitmap font number or a number specifically assigned to
the scalable font using the SFNT command (See File on the next page).
If no font has been assigned to the specified alternate number, the ALTF command has
no effect: the font does not change.
The ALTF command enables you to prepare a document using several fonts, without
deciding in advance which specific fonts to use. For example, you could use ALTF 1 to
designate plain text and ALTF 2 to designate italics, and allow the specific size and style
of type to be determined by SETF commands at a later time.

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g