Overview of PRESCRIBE Commands by Function
9
Debug Commands
These commands can be used to check the print data in hexadecimal format for print jobs
with unexpected output.
External Media Control Commands
If an external storage, such as JEIDA Ver. 4 memory card or CompactFlash card, or a
hard disk, is installed in the printing system, the following commands can be used to
write data to or read from it. These commands do not apply to the models that do not
have an external storage.
DAM Delete All Macros 71
DELM DELete Macro 75
EMCR Enable MaCRo depending on paper source 88
ENDC END carbon Copy 91
ENDM END Macro 93
MCRO define MaCRO 159
Command Function Page
ENDD END Dump 92
RDMP Received-data DuMP 216
Command Function Page
RWER D [Read/Write External Resource] Delete data on external media 240
RWER F [Read/Write External Resource] Format external media 241
RWER I [Read/Write External Resource] automatically print partition Infor-
mation
242
RWER L [Read/Write External Resource] print partition List 243
RWER R [Read/Write External Resource] Read data from external media 244
RWER S [Read/Write External Resource] Store TrueType font 246
RWER T [Read/Write External Resource] set Terminate string 248
RWER W [Read/Write External Resource] Write data to external media 249
RWRF D [Read/Write Resource File] Delete data on external device 250
RWRF F [Read/Write Resource File] Format external device 251
RWRF L [Read/Write Resource File] print resource file List 252
RWRF P [Read/Write Resource File] set hidden file 253
RWRF T [Read/Write Resource File] set Terminate string 254
RWRF W [Read/Write Resource File] Write data to external device (API pro-
gram)
255
RWRF W [Read/Write Resource File] Write data to external device (font) 256
RWRF W [Read/Write Resource File] Write data to external device (macro) 258
WRED WRite EnD 358
Command Function Page