Kyocera KM-1500 User Manual

!R!
213
!R! — PRESCRIBE start sequence
Format
!command-recognition-character!
Parameter
command-recognition-character:
capital R, unless changed by the SCRC or FRPO P9 command
Function
When the printing system receives !R!, it enters PRESCRIBE mode and treats the
following data as PRESCRIBE commands. The command that follows the !R! command
should be separated from the !R! by a space or placed on a new line.
The command recognition character can be changed from capital R to another character.
Temporary changes can be made using the SCRC (Set Command Recognition Character)
command described later. The RES command restores the command recognition
character to its FRPO-set value. Permanent changes can be made with the FRPO
command described in Chapter 6 of the Technical Reference manual.
If !R! is used by mistake when the printer is already in the PRESCRIBE mode, the
printer ignores the mistaken !R! and whatever follows, up to the next semicolon.
File
!R! SFNT ’Helvetica’, 14; EXIT;
Following these five
lines, the printer
enters PRESCRIBE
mode to execute
commands.
!R! UNIT I;
BOX 2, 2;
BOX 1, 1, E;
CIR 1;
BOX 1, 1;
PAGE;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g