Kyocera KM-1500 User Manual

RGST
223
RGST — offset ReGiSTration
Format
RGST horizontal-offset, vertical-offset;
Parameters
horizontal-offset:
horizontal offset value from the absolute coordinate (0, 0) for the physical paper feed
direction, in current unit. The coordinates may be positive or negative.
vertical-offset:
vertical offset value from the absolute coordinate (0, 0) for the physical paper feed
direction, in current unit. The coordinates may be positive or negative.
Function
This command moves the coordinate origin by the offset (physical horizontal and
vertical directions) as measured from the values specified. The intersection (shared area)
of the current printable area and the printable area shifted by the new offset registration
is defined as the valid printable area.
No page break is caused when this command is received. The offset values set using this
command are valid even when the printing system is in HP emulation mode.
Since this command is PCL command-compatible (<Esc>&l #U, <Esc>& l #Z), the
offset values are cleared to zero only by a software reset (<Esc>E). In other words, the
offset is only cleared by PRESCRIBE (RES and FRPO INIT commands) when the
emulation is HP.
An error will result and the command has no effect if a command format other than the
above is used. An error will result and the value in question will be ignored if horizontal-
offset or vertical-offset is specified as a value exceeding the physical dimensions of the
current paper size.

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g