Kyocera KM-1500 User Manual

SATU
259
COLOR
SATU — adjust SATUration level
Format
SATU degree;
Parameter
degree:
degree of saturation level:
number from –10 to 10 (Default = 0)
Function
The SATU command adjusts saturation level based on the specified parameter.
The color bars below show saturation variations using hue “R” as an example. The top
color bar represents the default saturation variation. The symbol indicates the median.
The left side represents the lower saturation range and the right side the higher saturation
range. The middle color bar is an example showing an increase in saturation. (The higher
saturation range is increased.) The middle color bar is an example showing a decrease in
saturation. (The lower saturation range is increased.)
Varying saturation allows images in the lower saturation range to be more saturated and
sharp or, conversely, images in the higher saturation range to be faint and shaded off.
Saturation cannot be controlled hue by hue. However, since impressions vary with hue,
you need to control with care.
This command is enabled for all color spaces, all color modes and all monitor simulation
modes.
If ink simulation is set to other than None, this command is disabled.
This mode is not held in the printing system. For this reason, saturation is reset to its
default state when the power is turned on.
Default saturation
balance
Saturation
increased
Saturation
decreased

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g