Kyocera KM-1500 User Manual

LAPI
145
LAPI — LoaD API Program
Format
LAPI Program type, PRESCRIBE command, function name;
Parameters
Program type:
Type of the downloading program
"PRE" PRESCRIBE command
PRESCRIBE command name:
Name of the PRESCRIBE command to be stored
Alphanumeric string of 2 to 4 characters
(Only in the case of "PRE")
Function name:
Name of the function that starts the user program
(Only in the case of "PRE")
Up to 31 characters
Function
The LAPI command downloads the API program.
As described in the example below, add the string "WRED" to the end of the
downloading data as a terminator.
It is possible to add a string other than "WRED." It is because if the downloading
program includes the string "WRED," this must be changed. To change the terminator,
use the RWRF T command.
When storing a new PRESCRIBE command, if the specified command name has already
been stored, the sending data will be invalid.
Data downloaded with the LAPI command will be deleted (invalid) upon the system
restart.
Example:
!R! LAPI "PRE" , "XXXX" , "XXXXXXXX" ;[Program Data]WRED;
EXIT;
After "WRED" is changed to "TEST"
!R! LAPI "PRE" , "XXXX" , "XXXXXXXX" ;[Program Data]TEST;
EXIT;

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g