Kyocera KM-1500 User Manual

STPL
337
STPL — STaPLe
Format
STPL [position];
Parameter
position:
stapling position:
1 = bottom left, one staple
2 = top left, one staple
3 = left, two staples (straight for Legal size)
50 = top left, one staple
51 = top right, one staple
52 = left, two staples
53 = right, two staples
54 = top, two staples
Staple parameters and positions
Function
The STPL command staples the pages of a job at the position specified by the position
parameter (See above.) using a document finisher incorporating the stapler unit. With
position 2 (top left), stapling is automatically straightened (vertical) when Legal size
paper is used.
Parameter values 50 to 54 are valid for certain copier models only.
The number of sheets that the stapler can staple at a time depends on the STPC command
setting.
The job to be stapled must be defined by the JOBS command. Stapling is valid only
when the STPL command is issued preceding a JOBS command sequence.
The STPL command automatically deactivates Jog and Job Separation if these functions
are enabled in advance. The output stack is enforced to be the stapler output ignoring the
A
1
AAAA
A
2 2, Legal 3
50 51 52 53 54
AAA AA A

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g