OTRY
175
OTRY — select paper Output TRaY
Format
OTAY tray;
Parameter
tray:
1 = printing system’s face-down output tray
2 = face-up output tray of the printing system or the option stacker
3 = face-down output tray of the option stacker
4 = face-up output tray of the option stacker (subtray)
5 = job separator
7 = face-down output tray of option stacher (subtray)
11 = face-down output tray of the option mailbox 1
12 = face-up output tray of the option mailbox 1
13 = face-down output tray of the option mailbox (all trays)
14 = face-up output tray of the option mailbox (all trays)
21 = face-down output tray of the option mailbox 2
22 = face-up output tray of the option mailbox 2
31 = face-down output tray of the option mailbox 3
32 = face-up output tray of the option mailbox 3
41 = face-down output tray of the option mailbox 4
42 = face-up output tray of the option mailbox 4
51 = face-down output tray of the option mailbox 5
52 = face-up output tray of the option mailbox 5
61 = face-down output tray of the option mailbox 6
62 = face-up output tray of the option mailbox 6
71 = face-down output tray of the option mailbox 7
72 = face-up output tray of the option mailbox 7
Function
The OTRY command instructs the printing system to deliver pages to the corresponding
output stack of the printing system or the option stacker. The selected tray remains in
effect until changed by another OTRY command. The default value is 1: the printing
system’s face-down tray.
If an optional device such as a stacker, a document finisher, or a sorter is installed, the
tray value 2 instructs the printing system to deliver printed pages to its face-up tray; the
value 3 delivers the pages to its face-down tray. The tray values of 5, 7, 11, 12, 13, 14,
21, 22, 31, 32, 41, 42, 51, 52, 61, 62, 71, and 72 are valid for certain copiers installed
with the applicable option device.
The OTRY command should be placed at the top of a file or program.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
