Kyocera KM-1500 User Manual

PRESCRIBE Command Reference
54
CLPR — CLiP Rectangular area
Format
CLPR [x1, y1, x2, y2];
Parameters
x1:
x coordinate of the top-left corner of the rectangle
y1:
y coordinate of the top-left corner of the rectangle
x2:
x coordinate of the bottom-right corner of the rectangle
y2:
y coordinate of the bottom-right corner of the rectangle
Function
The CLPR command describes a rectangular path which intersects the inside of the texts,
current path, or raster graphics objects. The clipping rectangle does not clip those
graphics segments drawn in the standard mode graphics. Any painting operations outside
the specified rectangle is erased and those segments within it are painted on the page.
The coordinates are measured from the top and left edge limits in the units designated by
the UNIT command. If the parameters are omitted, the rectangle is equal to the size of
the current page size. If an attempt is made to position the top-left corner to the right of
the bottom-left corner [greater values for (x1, y1) than for (x2, y2)], the printing system
exchanges the coordinate values with each other.
The printing system resets the size of the rectangular clipping path to be equal to the
maximum printable area of the current page size when a PSRC, RES, SPO, or SPSZ (Set
Page SiZe) command is encountered.

Kyocera KM-1500 Specifications

General

Maximum print size	A4 (210 x 297 mm)
Standard media sizes	Universal cassette - 60-105 g/m2, A4, B5, A5. Multi-purpose tray, 60-163gsm, A4, B5, A5, A6
Standard input capacity	550 sheets
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	15 cpm
Dimensions (WxDxH)	496 x 421 x 385 mm
Internal memory	16 MB
Maximum internal memory	144 MB
Hardware scan resolution	600 x 600 DPI
Power supply type	220~240V @ 50/60Hz
Grayscale levels	256

Weight and Dimensions

Weight	14000 g